Steilacoom Boiler Guide: Basic Maintenance

January 20th, 2012

The boiler in your Steilacoom home is a sensitive piece of equipment that needs routine maintenance and repairs. Regularly maintaining your boiler is especially important for safety reasons. Many boiler malfunctions and accidents are due to neglecting some of these basic tasks.

Even if you’ve just installed a new boiler, the safety valves and settings should be checked by a professional on a regular basis to prevent a breakdown or hazard. We recommend that you schedule a boiler inspection and cleaning at least once a year.

A service technician will measure the pressure, drain and remove sediment buildup, test the efficiency ratings, and make sure your boiler is set at the right temperatures. Regular maintenance can also help you determine whether or not you need a boiler replacement. By keeping track of performance levels, you will be able to tell when it’s time for an upgrade.

Other tasks performed during an annual maintenance visit include cleaning and lubricating all the components, checking for any leaks or clogs, and testing gas boilers for any carbon monoxide intrusion. If you have any gas appliances in your home, you should always have carbon monoxide detectors and test them once a month.

Boiler pressure is something that you can check often on your own. If you aren’t sure how to read the pressure gauge, or if you aren’t sure what the right pressure should be, just call one of our technicians to walk you through this process.

Always call Sound Heating & Air Conditioning Inc. if you have any problems with the boiler in your Steilacoom home. We are here to help and answer any questions you may have.

Continue Reading

Water Heater Guide: Sizing a Tankless Water Heater

January 18th, 2012

Tankless water heaters are gaining popularity among Sammamish homeowners because of their on demand hot water supply and space-saving design. Although they are more expensive than traditional tank water heaters, on demand water heaters are more efficient, reliable, and easier to install and maintain. Before choosing to install a tankless water heater, however, you will have to decide which size will meet your hot water needs.

Rather than storing hot water in a tank, the tankless models heat the water with individual units located near the application where hot water is needed, such as a shower or washing machine. For larger homes, some of these smaller units cannot heat enough water for several applications running at the same time. You can also install a single tankless water heater for the entire house, or separate ones for appliances that use more hot water.

Finding the proper size and type will depend on the flow rate—measured  by a GPM (gallons per minute) number—that each fixture needs. Every application has a standard flow rate that must be added up in order to calculate the hot water demands for your entire home. For instance, if someone is using a sink with a 1.5 GPM at the same time another person is running a shower with a 2.0 GPM, the flow rate for the tankless unit would need to be at least 3.5 gallons per minute. You will have to add up the flow rate for all the applications in the house to get the minimum GPM figure for your tankless water heater.

In addition to flow rates, tankless hot water heaters are also measured by how much the water temperature needs to rise as it moves through the heating unit. You can determine the temperature rise for each application by subtracting the temperature of water coming in from the desired temperature going out. Once you add those together with the overall flow rates, you will know which tankless water heater can handle your overall hot water needs.

Before you buy an on demand hot water heater, it is best to talk to a professional installer. While the flow rates and temperature rise for most household appliances are fairly standard, these numbers can vary because of several factors that professionals are trained to calculate. Size is not the only factor to consider when shopping for a tankless water heater. Fuel type and efficiency should also be factored in to your purchase, which is another reason to talk to a licensed Sammamish installer.

Continue Reading

Happy Martin Luther King Day from Your Greater Puget Sound Area HVAC Contractors!

January 16th, 2012

Happy Martin Luther King Day! This holiday is not just about celebrating civil rights but also about serving your community. If you have the day off today, why not try spending it helping others? From volunteering at an animal shelter to helping the homeless, there are hundreds of ways you can make your community a better place to live. Have a great holiday!

Continue Reading

Heating Installation Tip: Load Calculations

January 13th, 2012

Do you ever feel that your Kent home just doesn’t get cool enough during the warm months or warm enough during the cold months? You have tried to adjust your thermostat to the right comfort level but it just never seems right. And on top of that, you notice that your utility bills keep going up and up. Even when you dial up the thermostat in the summer and dial it down in the winter to saving on energy usage, your bills are still about the same.

You could try adding fans and shedding clothes during the warm months or wearing sweaters and crawling under a pile of blankets in the cold months. But do you really enjoy living that way? There must be another solution as to why your heating and cooling (HVAC) system is just not keeping you comfortable – and affordable.

That air conditioning condensing unit sitting in your backyard and the furnace in your basement should be making your home as comfortable as possible. But in many cases, they are not. That’s because whoever installed those HVAC system components didn’t do their homework on your home. The components were sized incorrectly. If a furnace or air conditioner is sized incorrectly, it usually cannot keep up with the demand for heat or cold and often puts such a burden on the equipment. As a result, regular failures and repair bills are commonplace.

And it may not be the fault of the installing HVAC contractor. Over the years your home may have undergone renovations including additions and new windows, which have increased the square footage or demand for more heating or cooling. Those renovations may not have included upgrades to your home’s HVAC system.

So how do you check for the right size? Call a Kent HVAC contractor and ask for an energy audit for your home. The audit will include several key checks including a load calculation, which adds in the size of your home’s living space, number of door and windows where heat loss or gain could occur, and a check of heat loss or gain through leakage in cracks, roofs, crawlspaces, etc. An energy audit will determine what size of furnace or air conditioner is needed to meet the heating or cooling needs of your home and its own individual characteristics. Your HVAC contractor may also factor in the number of building occupants and normal usage patterns, i.e. having a home office or stay-at-home parent versus a working family where your home is occupied mostly at nights or on weekends.

All of these factors are considered when determining the equipment size. In air conditioning jargon, you will hear about tonnage of cooling capacity. An example may be a 2.5 ton air conditioning unit for a 2,000 square foot home. In furnace jargon, you will learn about Btu ratings, which are British thermal units. Most furnaces are sized in 20-25,000 Btu increments. Each is matched to the cooling or heating needs of your home. Your HVAC contractor will likely recommend using a programmable thermostat, too. That way, you can set the temperature of one or more zones in your home to when each zone is occupied.

Make sure you don’t hire someone who “guesstimates” how much cooling or heating capacity you need for your home. Find a qualified professional who will make the correct calculations and who will qualify their recommendations. A properly sized HVAC system will equate to manageable utility bills and above average indoor comfort. You can live with that.

Continue Reading

Heating System Maintenance: Review from Vanessa P

January 11th, 2012

With it working quietly all day in the background, it is easy to forget about your home heating system. Since your heating equipment is relatively complicated, it does require annual maintenance to continue to function safely and at peak efficiency. A maintenance inspection will also detect any potential problems early so you can get them repaired before a complete breakdown.

We try to do our best on every service call, from a major installation to a simple maintenance visit. Our technicians will try to answer all of your questions and perform any job quickly and efficiently. Here is what Vanessa P in Graham, WA wrote to us about her heating maintenance:

We just used Sound Heating and Air to service our furnace and heat pump by recommendation of a friend. Our friend said they were friendly, knowledgeable and reasonably priced. We found all those to be true. Jeremy came to our home and was super nice, answered questions and got the job done. We will definitely be using them for our servicing. I recommend them to anyone that wants a family owned, service oriented heating and air contractor. I will be recommending them to all my clients as well. Nice job!

– Vanessa P. in Graham, WA

We are glad you had such a good experience! We offer 24 hour emergency service, so give us a call day or night if you need any repairs this winter!

Continue Reading

HVAC Contractor Tip: Basic Heating Safety Tips

January 9th, 2012

While you should schedule a yearly maintenance visit with a qualified HVAC technician to check for any safety concerns, you can also reduce potential safety hazards in the heating system of your Enumclaw home. Whether you have a furnace, heat pump, or boiler, you can substantially decrease the chances of dangerous situations with a few minor routine tasks.

If you have any questions about how to better maintain your heating system, give us a call to speak with one of our expert HVAC technicians. Here are a few guidelines to get you started.

Ventilation in Forced-air Systems:

  • Regularly vacuum and clean out your heating vents and fan blower.
  • Check the condition of your chimney and vent pipe to make sure that none of the parts are damaged or show signs of deterioration.
  • Test the thermostat occasionally to make sure your heating system is working at optimal levels. There could be a safety concern if your heater is not properly heating your home.

Heat Exchangers:

  • Heat exchangers should be inspected often to prevent carbon monoxide leaks. Check for any obvious issues, such as rust or other damages.
  • The heat exchanger for furnaces should be inspected by a professional once a year in case there are hidden problems with the equipment, or if any of the components need to be replaced.
  • Check the pilot light in gas furnaces for any flickers or changes in color. Have someone turn up the thermostat while you watch the light, but turn off the system for five minutes first. If there are any changes, there could
  • be a problem with the heat exchanger. Call a professional if you suspect issues with your heat exchanger.

Heating Equipment Inspections and Adjustments:

  • Boilers should be drained regularly to reduce sediment buildup, in addition to testing the water level safety controls. It’s best to have a professional perform these tasks if you aren’t sure how to do them on your own.
  • Adjust the temperature settings if you suspect that the heater isn’t working properly, and if it doesn’t work call a professional heating technician, or if you aren’t sure how to locate or adjust the controls.
  • Check the overall equipment for cracks, rust, or any other obvious signs of damage or deterioration that could create safety hazards.

In addition to performing these tasks, call a licensed Enumclaw heating contractor to inspect your heating system at least once a year.

Continue Reading

How a Ceiling Fan Can Help Heat Your Port Orchard Home

January 6th, 2012

Most people who have ceiling fans in Port Orchard never turn them on in the winter. They assume that the fan is designed solely to cool the house – after all, blowing air feels pretty nice doesn’t it? But, a ceiling fan can actually help to move heat around your home and lower your heating bill if used properly. Here are some tips to do just that.

Rotating Warm Air

Warm air naturally rises. So, when you turn on your furnace and the blower fan pushes warm air through your ductwork into the various rooms of your Port Orchard home, the warm air immediately rises to the ceiling. So, for the room to feel as comfortable as you want it, you must wait for enough heat to circulate into the room to displace the cold air that was already there.

However, instead of waiting for warm air to fill the room, you can circulate the warm air as it arrives with a ceiling fan. By turning on your ceiling fan and changing the direction so it blows down (which most people already have it set to), the warm air will be pushed toward the floor, mixing it smoothly into the room and keeping you more comfortable without having the furnace on constantly.

This does two things. First, it keeps the room comfortable regardless of when the furnace cycles on or off. Second, it keeps the thermostat reading stable so the furnace doesn’t cycle on and off so quickly. If the warm air regularly rises up and the lower levels begin to cool, your furnace will frequently turn on and off as it tries to maintain the same temperature.

A Low Cost Addition to Your Home

Ceiling fans are inexpensive and aesthetically pleasing. They move air throughout the room, keep warmth low where you need it and can help reduce your energy bill in multiple ways. If you’re not sure whether a ceiling fan is right for you, talk to a Port Orchard technician about just how much money one of these simple devices can save you. I bet you’ll be convinced.

Continue Reading

5 Reasons to Replace the Furnace in Your Buckley Home

January 4th, 2012

Many Buckley homes are heated with furnaces, since they generally provide safe and efficient heat.  Furnaces have also improved dramatically over the years as manufacturers find ways to make them more efficient. Even if your furnace has been reliable for many years, it may be worth the money to replace your old furnace with a newer, more efficient model.

Here are five major benefits to upgrading your Buckley furnace.

1. Lowering Your Utility Bills

Whether you realize it or not, your current furnace could be costing you more than it should in heating bills. If your furnace is 15-20 years old, it’s probably not heating your home as efficiently as the newer models with higher AFUE ratings. Even if your heating system has been replaced within the last ten years, the technology has advanced enough to consider an upgrade.

2. Fewer Repairs

Repair costs can add up if you are constantly repairing your furnace. Routine maintenance for your furnace can help reduce the need for repairs, but as furnaces age, they tend to need more repairs and replacement parts. If you need frequent repairs for your furnace, it may be time to replace it with a newer one.

3. More Consistent Heat

While maintaining consistent temperatures throughout your home involves several factors, such as insulation and thermostat control, your furnace could also be the reason you aren’t getting enough heat to all parts of the house. If some rooms are colder than others, or if your heating bills have recently gone up, it may be time for a furnace replacement.

4. Reduce the Chances of a Breakdown

When a furnace breaks down, it not only leaves you without heat, but it is also a major expense. Budgeting for a new furnace before it breaks down will put less financial burden on you than needing an emergency furnace replacement. Newer model furnaces are also more reliable and less likely to give you problems if maintained properly.

5. Safety

There’s higher potential for safety concerns with older or poorly maintained furnaces. In addition to fire hazards, carbon monoxide poisoning is another serious threat. When the heat exchanger stops working because it’s corroded or faulty, carbon monoxide can leak into the home. If you’ve had your furnace for more than 20 years, it could create safety hazards that you may be unaware of.

No matter how long you’ve had the furnace in your Buckley home, it’s always wise to speak with a qualified HVAC technician about furnace upgrades, particularly if you have expensive heating costs. Call Sound Heating & Air Conditioning Inc. today to talk with one of our heating experts about furnace upgrades.

Continue Reading

Heating System Ventilation 101: Basic Guidelines from Bremerton

January 2nd, 2012

Maintaining Proper Ventilation for Combustion Systems

Anytime you maintain, retrofit, or replace a gas heating system in your Bremerton home you also need to be concerned with air quality. Combustion air is needed by all oil and gas heating systems to support the combustion process. This air is provided in some homes by unintentional air leaks, or by air ducts that connect to the outdoors. The combustion process creates several byproducts that are potentially hazardous to human health and can cause deterioration in your home. You can protect yourself from these hazards, as well as maintain energy efficiency, by ensuring that your chimney system functions properly and that your gas heating system is properly ventilated. In some cases, installing a sealed-combustion furnace or boiler can also help.

Chimneys

Properly functioning chimney systems will carry combustion byproducts out of the home. Therefore, chimney problems put you at risk of having these byproducts, such as carbon monoxide, spill into your home.

Most older gas furnaces and boilers have naturally drafting chimneys. The combustion gases exit the home through the chimney using only their buoyancy combined with the chimney’s height. Naturally drafting chimneys often have problems exhausting the combustion gases because of chimney blockage, wind or pressures inside the home that overcome the buoyancy of the gases.

Atmospheric, open-combustion furnaces and boilers, as well as fan-assisted furnaces and boilers, should be vented into masonry chimneys, metal double-wall chimneys, or another type of manufactured chimney. Masonry chimneys should have a fireclay, masonry liner or a retrofitted metal flue liner.

Many older chimneys have deteriorated liners or no liners at all and must be relined during furnace or boiler replacement. A chimney should be relined when any of the following changes are made to the combustion heating system:

When you replace an older furnace or boiler with a newer one that has an AFUE of 80% or more. These mid-efficiency appliances have a greater risk of depositing acidic condensation droplets in chimneys, and the chimneys must be prepared to handle this corrosive threat. The new chimney liner should be sized to accommodate both the new heating appliance and the combustion water heater by the installer.

When you replace an older furnace or boiler with a new 90+ AFUE appliance or a heat pump. In this case, the heating appliance will no longer vent into the old chimney, and the combustion water heater will now vent through an oversized chimney. This oversized chimney can lead to condensation and inadequate draft. The new chimney liner should be sized for the water heater alone, or the water heater in some cases can be vented directly through the wall.

Other Ventilation Concerns

Some fan-assisted, non-condensing furnaces and boilers, installed between 1987 and 1993, may be vented horizontally through high-temperature plastic vent pipe (not PVC pipe, which is safely used in condensing furnaces). This type of venting has been recalled and should be replaced by stainless steel vent pipe. If horizontal venting was used, an additional draft-inducing fan may be needed near the vent outlet to create adequate draft. Floor furnaces may have special venting problems because their vent connector exits the furnace close to the floor and may travel 10 to 30 feet before reaching a chimney. Check to see if this type of venting or the floor furnace itself needs replacement. If you smell gases, you have a venting problem that could affect your health. Contact your local utility or your Bremerton heating contractor to have this venting problem repaired immediately.

Chimneys can be expensive to repair, and may help justify installing new heating equipment that won’t use the existing chimney.

Continue Reading

Happy New Year’s Eve from Your Puget Sound Heating and Air Conditioning Contractor!

December 31st, 2011

Happy New Years! We hope you have a great time tonight welcoming in the New Year and saying goodbye to the old. Forty-five percent of people make New Year’s resolutions; ours is to serve our customers even better than we did last year! If one of your resolutions is to make your home more green, remember that improving your insulation, sealing up any air leaks, and upgrading your HVAC system can have a big impact on your energy usage. A makeover for your house is great way to start off the year; it will make your home more comfortable and more environmentally friendly!

Continue Reading