When Should You Replace Instead of Repair Your Heating? A Question from Olympia

October 21st, 2011

We all dread an expensive repair in Olympia, whether it is a car that needs a new transmission, a leaky roof that needs new shingles, or electrical wiring that has been chewed up by a wild animal. Equipment repairs are a necessary evil. We often try and put bandages on things that we know should be replaced but we just can’t afford to replace them.

The same can be said about your home’s heating system. When your heat goes out or your home just doesn’t seem to be heating up to the setting on your thermostat, your first inclination is to check and see if it is running. Some people will put their hand over a heating vent to check for hot air while others may go into the basement or mechanical room to listen to hear if the furnace is running. Maybe there is a blockage in the ventilation system or a blown circuit breaker, two relatively easy fixes.

If the furnace isn’t working after checking the obvious symptoms, your next move is to call for service. Any qualified heating professional would be able to diagnose your problem and offer suggested repairs. Something relatively minor like a bad circuit board or blown fan motor are not real expensive repairs and are the best option versus replacing the furnace. And you may keep experiencing the same problem and getting the same repair work done – anything to avoid an expensive replacement.

But at some point the vicious cycle will come to an end. Your repair bills will begin to inch their way past the cost of replacing the furnace. You can only bandage a problem so long before it becomes “unfixable.” You may not want to pay an expensive replacement bill but consider the alternatives.

First is the obvious – it costs too much to keep repairing the furnace. Secondly, you never know when the furnace may break down and its failure to operate could have dangerous effects on the people in your home, especially if someone is sick. Third, your furnace may not be able to keep up with the heating demand due to lifestyle changes, i.e. an addition put on the house, carpeting removed and wood floors exposed, a new window, door, or skylight added, etc. Your old furnace may not have been designed to keep up with these changes and the repairs are only delaying the inevitable.

Ask yourself if everyone in your home is comfortable during cold weather. If most answer no, it may be time to consider replacing that old furnace with a new, energy efficient model that uses today’s technology – and leaves a smaller carbon footprint – to keep up with the demand for heat, in any sized building or home. Your decision to replace your old heating system could be as simple as the need to use modern technology to solve your indoor comfort problems.

Continue Reading

Essential Components of a Home Comfort System: A Tip from Federal Way

October 19th, 2011

Indoor comfort in your Federal Way home is defined by several factors: temperature, humidity, and air quality. If any one of the three is out of the “normal” range it can affect the quality of life for the building occupants.

The ultimate goal of any heating & cooling contractor is to ensure that customers are comfortable – meaning that all three factors are addressed when servicing, replacing, or installing new equipment in a home. This equipment includes furnaces and air conditioners but also extends to humidifiers, dehumidifiers, electronic filters, ultraviolet (UV) lighting, infrared heating, etc.

Obviously, the essential component for most U.S. households is a furnace. Air conditioners may not be essential for all parts of the U.S., namely the northern states, but are still considered an integral part of any home comfort system.

Let’s look at the furnace first. There are several choices but most can be found in two different classifications: single-stage or variable speed two-stage. Your choice depends on the indoor square footage, your own comfort needs, and possibly the cost of energy units (gas or electric for example). Forced air is a common method of moving heated air to all parts of the home via an air handling unit and through a duct system. But gaining in popularity is radiant heat (electric), which does not utilize a duct system.

Air conditioners also come in a variety of sizes, including window/room air conditioners or central air conditioning, which is likely a “split” system including an outdoor unit and indoor coil. The size of the air conditioner is determined by square footage, which is part of a load calculation performed by qualified heating & cooling contractors while planning the equipment replacement or new installation. An oversized air conditioner may produce high humidity levels and an undersized unit may not provide enough cooling to all areas of the home. High humidity levels contribute to higher indoor temperatures in the summer, and can also lead to respiratory problems.

If someone in your home has allergies or is sensitive to certain pollutants in the air, it may be important to include extra filtration in your heating & cooling system, such as electronic filtration and UV lighting mounted in the buildings duct system, to kill germs and contaminants.

As always, it is best to consult with a qualified and licensed heating and cooling contractor who can offer the best solutions for your home comfort system.

Continue Reading

Benefits of Replacing Your Furnace in Fife

October 17th, 2011

You are about to make one of the largest purchases in your life – a new furnace for your Fife home. Maybe your old furnace is on life support and needs immediate replacement or you are looking for a better, more efficient furnace that will raise the comfort level of your home while reducing utility bills and carbon emissions.

If the furnace in your basement, crawl space, or attic is 15-20 years old, it may be a single-stage 80% percent efficient model, which doesn’t meet the higher efficiency standards of today’s models. It uses more energy, i.e. gas, oil, or electricity, to operate. And a single-stage furnace does not always provide even heating to all rooms in the home, based on the varying winter weather conditions. There may be large temperature variations from room to room.

Your new furnace will likely be more efficient and environmentally friendly than the one it is replacing – which are the two biggest benefits to replacing an old furnace. So, let’s take a closer look at these benefits, which link energy efficiency to the latest technology – namely two-stage furnaces and variable speed motors.

Two-stage furnaces start out by running in a first stage, which uses less than 70% of its capacity. This stage works well on moderate winter days. On colder days, the furnace will meet your extra heating demand by adjusting to the second stage in the heating cycle. Since the furnace spends most of its time operating in its lower capacity (first or single stage), it burns less fuel than a traditional furnace that always runs at full capacity and then shuts off when heating demand is met. You will see lower utility bills and a shorter payback period on your new furnace investment.

Variable-speed motors can actually save you money on your energy bill as they consume less electricity than standard motors. Variable speed furnaces save you money by having a higher SEER rating. SEER is the abbreviation for seasonal energy efficiency ratio. The higher the SEER, the more energy efficient the unit. The low operating costs of a variable speed furnace can allow you to run your furnace blower. With the low operating costs of the variable-speed furnace you can constantly run your blower without the worry of driving up your utility bill, allowing for continuously filtered air.

The U.S. government, as well as local governments are making it more tempting for homeowners like you to purchase new energy efficient furnaces, too. Government agencies have been offering tax credits to homeowners who switch to energy-efficient appliances, including heating and cooling products. Utility companies also offer rebates to homeowners who wish to lower their utility bills by using high-efficient appliances. Chances are, your local utility has some type of rebate program in place.

And when you shop for a new furnace, look for add-on equipment such as electronic air filters and programmable thermostats. Each will raise the comfort level you will be enjoying from your new furnace.

Continue Reading

What to Do if Your Heating System Breaks in Tacoma

October 14th, 2011

What if the heart of your Tacoma home’s heating system – the furnace – stops working? The warm air that used to flow from your vents has been replaced by a chilly draft. It isn’t time to panic, but it is time to take action. Before you do anything, determine why the furnace stopped working. It may be something as simple as a tripped circuit breaker in your electrical panel. Check the circuit breakers first.

The pilot light in your furnace may have blown out. It can be re-lit if you follow the directions in your furnace owner’s manual. You can find answers on how to re-light a pilot light on the Internet, too.

If the shutdown has not been caused by an electrical or pilot light failure, there is still no need to panic. But another obvious question is: did you pay your last gas bill? Maybe you had a shutoff notice and either ignored it or forgot about it.

Now that you are convinced that the furnace has pooped out, here are some things you should do. First, find the name of a qualified heating and cooling professional. If you already use a heating contractor, contact them and schedule a service call.

While you are waiting for help to arrive, ensure that everyone is safe and accounted for. Make sure pets are nearby and protected from the cold, too. What you don’t want to do is use any appliance to keep you warm that is not designed to keep you warm, like a stove. If you have electric space heaters or propane heaters, carefully locate them in a well vented room (windows open a bit or portable fans circulating air). You don’t want any build-up of gases from fossil burning appliances, gases which could contain deadly carbon monoxide.

Huddle up everyone into a room and break out lots of blankets. You may even want to make an “adventure” of this – find a movie to watch and pop up a bunch of popcorn.  If your waiting time is more than 24 hours, you might want to call up a friend or relative and make arrangements to spend the night with them.

The main thing to remember is not to panic. Most qualified heating contractors, knowing the circumstances, will send out a repair person in a matter of minutes or within one or two hours. Just remember to avoid keeping warm by using unvented heating devices.

Continue Reading

Warning Signs of a Broken Furnace: A Guide From Renton

October 12th, 2011

How do you know when your furnace in your Renton house is “on the fritz?” There are warning signs of a broken furnace and some are recognizable – but not all. A broken furnace not only deprives your home of heat and comfort, it also can be deadly, too.

Let’s look at some of the warning signs.

Each year, hundreds of people die and many more are injured from the most common household poison: carbon monoxide. This colorless and odorless poisonous gas comes from several sources and the furnace is the most common source of all; more precisely a broken or malfunctioning furnace. Carbon monoxide is a result of incomplete combustion of a fossil fuel, which is when a fuel does not burn correctly or completely. In a furnace, carbon monoxide gas comes from a poorly operating burner or a cracked heat exchanger. A properly tuned and maintained furnace greatly reduces the risk of carbon monoxide poisoning.

Since carbon monoxide gas is colorless and odorless, it can go undetected. It can make people sleepy and create flu-like symptoms. Sometimes a person may fall asleep and never wake up. But there are warning signs. Drowsiness, vomiting, or flu-like symptoms are a warning sign. Regularly scheduled maintenance of your furnace by a qualified heating and cooling professional and installation of carbon monoxide detectors can reduce the risk of falling ill to carbon monoxide gas.

Another warning sign is a higher energy bill. Sometimes you can’t detect a problem right away because, like carbon monoxide, there may be no obvious signs. Higher utility bills can be a sure sign of a furnace that is working too hard and running more than usual. This may be a result of clogged or dirty air vents, or dirty filters. If your monthly bills are higher than those of the previous year, it may not just be because gas prices are higher.

There are other warning signs of a broken furnace, too. The most obvious is the failure of your furnace to bring your home up to the desired thermostat settings or to maintain an even temperature. Cold or uncomfortable houses are sure signs of a broken furnace. The furnace may cycle on or off, causing an uneven or inconsistent flow of heated air. This can be because of a poor blower or a clogged furnace filter. If you don’t feel any moving heated air or detect any unusual odors or smells coming from your heating vents, that’s a sure sign of a broken or malfunctioning furnace.

A broken or cracked gas line can emit odors and can cause a furnace to malfunction, too.

Don’t take a chance of losing heat and comfort this winter. At the first possible warning sign, call your local heating and professional for a heating system tune-up.

Continue Reading

How Heating Zone Control Can Save You Money: Some Advice from Covington

October 10th, 2011

The costs of heating your Covington home have risen dramatically over the past couple of decades, thanks to higher energy costs and price increases for heating equipment. Despite the strides made in energy efficiency, there seems to be no end in sight for the steady rise in heating equipment operating costs.

Now add in the cost of heating unoccupied areas of your home, such as basements, hallways, or extra bedrooms, and the energy costs go even higher. Most of these costs are unnecessary and avoidable if you have the time and a small investment in a well-planned heating “strategy” for your home. This strategy involves using heating zone controls to make the most efficient use of your heating system.

In a nutshell, here is how heating zone control works. The rooms in your home are connected to your heating system by a series of ductwork, which carries heated and conditioned area to all corners. But some of these areas may not need to be heated as much – or possibly at all – compared to other rooms in your home. For example, do you need heat in your kitchen but not in your basement? Most people would answer yes. Or they may say they need more heat in the kitchen and some, but not very much heat in the basement.

Or try this: do most people in your house spend more time in one room, such as the family room, and less time in their bedrooms? If so, why would it be necessary to heat the bedrooms all of the time? In order to deliver heat to areas in your home that need it the most, the ductwork to these rooms should always be “open.” Ductwork to other unused areas of your home can be “closed” during various times of the day.

Opening and closing of ductwork and airflow is achieved by zone controls. A zone control is installed in the home which electronically or wirelessly opens and closes “dampers” in the ductwork, depending on the heating demand. You can divert heat to areas of your home using zone control and dampers while decreasing the heating load on your furnace. This type of heating zone control will move heated air to where you want it. Simply put, you are not heating areas of your home that don’t need the heat.

The heating zone controls can be programmed for various times of the day, too. For example, you may not need any heat in your basement while you sleep or when you are away from home. You can program the damper in your basement’s ductwork to remain closed or partially open during these times. In a sense, the heating zone control in your home acts like a programmable thermostat – only it uses a series of dampers to control indoor temperatures.

The next time you walk into an unused part of your home, think about how much money you are spending to heat it. It makes sense to consider heating zone controls. The initial costs of installing zone controls and dampers are minimal and the payback in energy savings and comfort are substantial.

Continue Reading

The Effect of Dust Mites on Indoor Air Quality: A Tip From Covington

October 7th, 2011

There are three types of indoor air pollutants in your Covington home– particles, bioaerosols and gases. Dust mites are a special case because they are nearly invisible to the eye, but represent a substantial bioaerosol that can make it harder to breathe and result in a number of sometimes debilitating symptoms.

What Are Dust Mites?

Dust mites are tiny arachnids related to ticks and spiders that cling to fabric like curtains, carpet and upholstery. They resemble dust in the air and thrive in high humidity conditions. So, the easiest way to treat a dust mite problem is with proper dehumidification. Knowing whether dust mites are a real problem if you simply have a lot of dust and pollen floating around is tough. Here are some common symptoms to look for:

  • Dizziness
  • Nose Irritation
  • Respiratory Irritation
  • Cough
  • Chest Tightness
  • Asthma (made worse)
  • Allergic Reactions

Because dust mites are alive when you breathe them in, they can cause severe irritation to your throat and lungs and result in a number of uncomfortable reactions – ranging from a runny nose to a full blown allergic reaction.

Getting Rid of Dust Mites

So, how do you get rid of these tiny arachnids? The first step is to improve the humidity level in your home. Anything under 50% humidity makes it impossible for dust mites to survive, so air conditioning is the best step to remove the threat of these little bugs.

Tiny dust mites are among the larger air pollutants and can be captured by most MERV 10+ filters on the market. A HEPA filter will absolutely remove them as well, along with any other particulate or bioaerosols in your home.

Continue Reading

Get the Best Value From Your Contractor in Tukwila

October 5th, 2011

When looking for the best value from a Tukwila service provider, it is best to understand what value means to you. The dictionary defines value as “a fair return or equivalent in goods, services, or money for something exchanged.”

In the case of a mechanical contractor, customers are looking for value in the quality of the replacement or newly installed parts or equipment. For example, if your contractor gives you the choice of a product that is warranted for five years versus one that is warranted for ten years – and the price for the longer warranty is within reason, it may be more valuable to choose the product with the longer warranty. It may cost more initially but it is less likely to be serviced as much and will last longer.

Similarly, your contractor may offer a value proposition which includes a “good,” “better,” “best” scenario for the product you are shopping for. You may choose from any of the three based on the amount of time you plan to live in your home or the level of comfort or convenience that you are accustomed to. And, if you choose a “good” product over a “best” product, it may diminish the value of your house when it comes time to sell.

Any good contractor who gives you these choices is one who is giving you the best value.

When it comes to service, there are also value choices, too. For example, how important is it to you to work with a contractor who values your time? Today, time can be just as important as money and is certainly a value consideration. One contractor may only be able to give you a large window of time when his company will be able to serve you, say 8:00 a.m. to 3:00 p.m. Is it worth your time or someone else’s to wait?  It may cost a little more but is it worth it to you? The answer is likely to be yes; and this adds a value to the contractor who respects your time.

The true value of a contractor lies in the equipment he sells, the service he provides, and the peace-of-mind and time savings you get in return.

Continue Reading

Is Special Insurance Required For Solar Systems? A Question From Puyallup

October 3rd, 2011

After working the costs of installation and the potential savings of solar energy over time for your Puyallup home, there is one more factor to include in your cost analysis: insurance. Inevitable questions surrounding the issue of insurance will arise such as whether home owner’s insurance covers your panels, if you can add coverage, and what additional insurance you might need. These are all logical and shrewd questions that you should be asking before installing a solar system in your house.

Existing Insurance

The unfortunate truth is that many homeowner’s policies won’t cover solar panels, with the logic being that the additional structure presents an additional liability. Insurance companies have expressed concerns over the solar panels overheating or that installation hardware mounted on the home creates opportunities for water to leak in.

These concerns have not been shown to be based in fact, but many companies still use them as guidelines. There is also the point of view held by some companies that because solar panels increase the potential resale value of the home, the insurance premiums should be correspondingly higher. In some cases, policies have been canceled due to the perceived increase in risk.

The most important thing is to inquire with your company regarding your current policy. Ask directly if you will be reimbursed for damage to solar panels, if they will raise your premiums, cancel your policy, and any other questions you might have.

Other Options

If you discover that your policy won’t cover solar panels, you still have some options. First of all, you can see if you can amend your policy to include your planned solar panels. If not, see if you can get a separate policy specifically for solar panels, either with your current company or another. Note that this will almost certainly be an additional expense, so you will want to account for that when figuring out costs. Fortunately, some of the more enlightened insurance companies offer discounts of up to 5% for homes that use solar power, so that may help offset the cost.

The degree of difficulty and amount of expense you must endure to insure a solar system will depend a lot on your insurance company’s philosophy and the area in which you live. The important thing is to look into these questions first in order to avoid a risky or expensive situation later.

Continue Reading

How Do I Know If Solar Panels Will Work On My Home? A Question From Maple Valley

September 30th, 2011

When undertaking any home improvement project, there will be challenges making sure the new features fit well with the existing construction. Solar panels are no exception. You may want to install solar panels on your Maple Valley home, but will the two work together?

There are ideal conditions under which solar panels can be used, and striving to create these conditions will often present some challenges. Fortunately, in most circumstances, there are some easy adjustments you can make to ensure your new solar panels work as well as or better than advertised.

The Big Three

There are three major factors which play in to solar panel performance more than anything else. First is orientation, or where the house has exposure to the sun. Ideally, solar panels should be mounted facing south to maximize efficiency. They can also work when facing some easterly or westerly directions, albeit with some performance loss.

For maximum exposure to the sun, solar panels should be mounted at an angle that matches the latitude at which your home sits. You also want to avoid any obstructions. The path from the sun to the solar panels should be as clear as possible, with minimal shading or obstructions to interfere with the panels collecting light.

While these represent ideal conditions, it is rare that a home will meet all of them as it sits. Fortunately, there are solutions to such problems, with the most comprehensive one being a ground mount. With a ground mount, a small structure is specially built and secured it to the ground, with the solar panels mounted on it. This is an especially good fix if you have problems with your orientation and roof angle. If the problem is shading or obstructions, that can be fixed simply be cutting down or trimming trees in the way.

Other Challenges

Independent of these major variables, other issues can come into play when determining if solar panels will be a good fit for your home. You have to worry about geography and weather, your energy needs, and the insurance costs of adding solar power to your home.

While these challenges exist, as you can see there are generally ways around each of them. Consult with a contractor or other expert, who can help you decide if solar panels are a good fit for your home.

Continue Reading