Sound Heating and Air Conditioning Inc. Blog: Posts Tagged ‘Puyallup’

3 Ways to Reduce Your Heating Bill This Fall

Tuesday, October 8th, 2013

Do you dread the coming of fall, not because of the drop in temperature, but because of the impact the drop in temperature has on your finances? You aren’t alone: home heating in Puyallup, WA can get expensive as the thermometer begins to fall. But you do have methods to reduce your heating bills, some of them very easy to do. These 3 options will get you started in putting a check on rising heating costs.

If you want advice on heating from experts, look to Sound Heating. We’ve served Puget Sound for over 20 years, so we know the sort of conditions you can expect to encounter during the later months of the year.

1. Lower your thermostat

What’s the best temperature to set your thermostat to? It’s almost certainly not the highest setting. Just because you can heat the inside of your home to 90°F doesn’t mean you should; aside from the high energy cost, this will overtax your heater and could cause it to break down. According to the US Department of Energy, homeowners can save 18% on their energy costs if they lower their thermostats 5° to 10° for 8 hours a day. This isn’t difficult: 68° is sufficient heat for comfort with an extra layer of clothes. When you’re asleep, lower the thermostat to 58° and pull up an extra blanket.

2. Seal heat leaks

The construction of modern homes aims to make them heat seals, so excess heat doesn’t get in during the spring and summer, and vital heat doesn’t escape during the fall and winter. But this seal isn’t perfect, and gaps around doors and windows, or insufficient insulation, will drain away this precious heat and make your heating system labor harder to compensate. Install storm windows to reduce heat loss, caulk your windows, and put weather stripping around the outside doors to keep as much heat as you can inside your home.

3. Schedule regular maintenance for your heater

Having a professional give your heater a check-up and tune-up is an excellent way to make sure it performs well without draining extra power during the fall. The technician will tighten connections and clean the system so it performs efficiently. Preventive maintenance will also reduce the wear and tear on your system so it won’t age as fast and will continue to perform at its best throughout the fall and into the winter.

The Puyallup, WA heating experts at Sound Heating are available 24-hours a day to help you with your heating needs. If you want to get started with reining in your heating bill for the coming fall, contact us to schedule your annual maintenance check.

Continue Reading

Tags: ,
Posted in Heating | Comments Off on 3 Ways to Reduce Your Heating Bill This Fall

This Year’s Heating Options

Tuesday, September 17th, 2013

Frequent rain and chilly temperatures are a hallmark for winters in the Seattle area, including outlying suburbs like Puyallup, WA. Heating systems can help combat that, providing warm and cozy homes to act as a refuge against the miserable weather outside. As heating season approaches, it pays to take stock of your particular circumstances and determine your heating options this year. Obviously, every case is unique, but a few general outlines can cover the basics.

The first option is to sit tight with your existing heating system, which is probably what most people prefer to do. Unless your furnace is more than 15 years old and/or is experiencing serious repair issues, there’s no need to install a new one. Instead, you should schedule a routine maintenance inspection from a qualified professional. He can come to your home, inspect the furnace for any signs of damage, clean the components and/or otherwise “spruce up” the unit for the upcoming cold weather.

You may also be in a situation where you don’t need a new furnace, but might want a few upgrades to improve the old one. Upgrades can range from insulated covers on exposed ductwork to better retain the heat to newer thermostats designed with pre-timed start and stop options. Such upgrades won’t break your bank, but can give you more options for controlling your heating, and more importantly, might save you money in your monthly electric bills.

Finally, you may need to consider replacing your existing unit entirely. If it’s more than 15 years old, is struggling to heat your home adequately and/or is undergoing repairs too frequently, a new unit may be what you need. The up-front cost may be high, but you’ll likely save money in repairs (to say nothing of monthly energy bills).

Regardless of what option works best for your home, it pays to consult a professional to understand your heating options this year. Sound Heating provides heating services throughout Puyallup, WA. Heating and furnaces are a specialty of ours, and we can discuss all of your choices with you before beginning maintenance or installation procedures. Give us a call today!

Continue Reading

Tags: ,
Posted in Heating | Comments Off on This Year’s Heating Options

How Indoor Air Quality Can Affect Your Air Conditioning

Thursday, August 29th, 2013

You may not realize it but the EPA estimates that poor indoor air quality is one of the top 5 leading threats to respiratory health. Given that most of us spend about 90% of our lives indoors this should make us realize just how important good air quality is to our health. In addition to being damaging to our health, poor indoor air quality can actually affect your air conditioning system as well. At Sound Heating  & Air Conditioning, we offer a large range of professional air conditioning services in Puyallup and we wanted to share a little bit about some of the things that bad air quality can do to your AC system. Call us today if you need any kind of services or if you have any questions.

Puyallup, WA  Air Conditioning Tip: Keep Your Air Clean

Modern homes are built very efficiently which means that they have to restrict the amount of outside air that can leak in. While this is great for efficiency it can also allow many different types of contaminants to build up inside your home’s air including dust, insect droppings, pollen, pet dander and more. Here are a few of the things that this can do to your home’s air conditioning system.

  • Clog the filter – Your air conditioning system has an air filter in it that keeps larger particles from getting into the moving parts of the system like the motor and also the evaporator coils. If you have a lot of contaminants in your air it could cause the filter to get clogged very quickly and restrict the flow of air through the system. In fact, a clogged air filter is one of the most common causes of AC repair. It can cause insufficient cooling, increased repair and also inefficient operation.
  • Increase repair – While your air conditioning system has an air filter, a lot of dirt and dust will still get through. This can cause the fan motor as well as the evaporator coils to get dirty. If your fan motor gets filled with dirt it could malfunction and cause you not to get any cool air in your home. Also, if the evaporator coils are dirty then they won’t be able to absorb as much heat out of your air which would reduce the efficiency of your system as well as the amount of cooling that you get in your home.

Whatever air conditioning problems that you might be having, call the Puyallup air conditioning repair experts at Sound Heating. We can also help you replace your current system if it has failed permanently.

Continue Reading

Tags: ,
Posted in Air Conditioning | Comments Off on How Indoor Air Quality Can Affect Your Air Conditioning

What is Refrigerant and How Does It Work?

Tuesday, July 30th, 2013

There are numerous types of refrigerant uses in a wide variety of residential and commercial applications. From natural refrigerants like ammonia and water to the latest in ozone-friendly R-410A, which is the current standard amongst air conditioning manufacturers, there are various kinds for various applications. But what is refrigerant and how does it work? The standard refrigerant has been widely tested for flammability and toxicity, and today’s refrigerants have only a minimal impact on the environment, while still remaining effective and efficient as a chemical that absorbs thermal energy at low temperatures and dissipates thermal energy at high temperatures. It’s important to know how refrigerant works because the more your know the better chance you will have at recognizing any problems. Call Sound Heating if you would like more information about the refrigerant that circulates through your coils or if you would like to schedule air conditioning services in Puyallup.

Let’s begin with the compressor. As the engine of the refrigerant cycle, it takes the low pressure, low temperature gas from the indoor evaporator coil and turns it into a high pressure, high temperature gas, one that is substantially higher than the outside temperature. It then travels to the condenser coils to be dissipated into the outside air with the help of an exhaust fan. It has now been condensed (hence the name), but it is not yet cool enough. It flows into an expansion valve where it cools rapidly and now can be used as a material for cooling. The evaporator coil circulates this cold, liquid refrigerant and the thermal interaction that occurs between the refrigerant and the warm indoor air causes the refrigerant to turn into a gas. Hence the cycle continues.

For a long time, R-22 (also known as Freon) was the standard in the HVAC industry, but it has since been exposed as a potential environmental hazard, and is now being phased out of production. Because today’s refrigerants are not able to be retrofitted into systems designed to handle this older standard, it’s important to recognize how this phase-out could affect you.

Call Sound Heating today for professional air conditioning services in Puyallup, OR.

Continue Reading

Tags: ,
Posted in Air Conditioning | Comments Off on What is Refrigerant and How Does It Work?

Air Conditioning Tip: AC Condensate Problems

Monday, July 2nd, 2012

The beauty of air conditioning in Tacoma is that we don’t have to do anything to live in a cool climate even when it’s boiling outside.  Programmed to adjust automatically, modern thermostats make it even easier.

It is very inconvenient therefore (not to mention uncomfortable) when our unit is not functioning properly forcing us to pay attention.  Suddenly over-heated, our first inclination may be to call for help, but often the expensive repair can be accomplished easily or avoided completely.

Air Conditioning 101

The process of conditioning air to a cooler temperature involves rapid evaporation and condensation of chemicals called refrigerants.  These are compounds having properties that allow them to change from liquid to gas and back at low temperatures.

When the liquid evaporates and transforms into gas it absorbs heat.  Compressed tightly together again, the matter condenses back into liquid with a residue of unwanted moist heat that must be released to the outdoors.

Over the course of handling the air to cool it, air conditioners are able to filter dust and dehumidify the air as well.  This release of moisture is why air conditioners have drains.

Condenser Coils

As the heat is removed from the gas, it forms condensation that must be drained from the system.  Tiny particles accumulate along the path, prone to shifting and resettling until they become lodged and can form a significant enough blockage to hamper the efficiency of the unit.  If the drain line becomes blocked, the unit drips or overflows the pan and works its way back into the house, causing damage and potentially mold.

This is when panic is inclined to call for the cavalry.

Easy Fix

A simple act of maintenance performed twice a year and requiring no tools can eliminate the problem. Your Tacoma air conditioning technician will do the following to check and maintain your condensate drain:

On the interior side, they will remove the panel of the unit and find the drain line, usually a plastic tube.  If the pan is full of water, there is a blockage.  On a whole house system, the tech will find where the plastic tube exits the house, making sure that it is above ground and clear to drain away. Then they will flush the line to ensure a clean and free flowing pipe.

To schedule your annual maintenance visit, give Sound Heating & Air Conditioning Inc. a call!

Continue Reading

Tags: , , , , , , ,
Posted in Air Conditioning | Comments Off on Air Conditioning Tip: AC Condensate Problems

Air Conditioning Guide: Things to Check on Your Broken AC Before Calling a Professional

Monday, June 25th, 2012

A broken air conditioner is a stressful situation, especially since you’re considering whether you need a Puyallup air conditioning professional to come out. No one likes spending the money to have a professional take a look at their system, so before you call anyone, make sure to check these problems. You may be able to fix the problem on your own without spending a dime.

Thermostat

The thermostat is one of the most common problems you’ll have with an air conditioner.  Make sure the thermostat wasn’t knocked out of position and the sensors near your coils are in the right place. Often times, a bumped sensor or a slightly off thermostat can cause this kind of problem and as a result, you’ll be left without steady cooling.

Check Your Filters

Another common problem that can cause issues with your air conditioner is filter clogging. While the system will continue to run with a clogged filter, there are a few issues that might pop up – it could smell funny or you might notice icing on the outside line (a major problem). If you allow the filter to get so clogged as to block the air flow from your system, you can expect a number of problems to crop up.

 Blower Belts

Check the system’s blower belt for damage like cracking, excess slack or general wear. A blower belt that isn’t properly installed or that needs to be replaced will reduce air flow which can result in ice buildup or poor air flow – it will make it harder for your system to maintain a steady temperature.

 Check the Outdoor Unit

Check to make sure nothing is blocking the outdoor unit. Clean the condenser coils and remove any debris that might have built up around the outdoor unit. Often, slowed air flow is caused by nothing more than leaves piled in front of your condenser.

If none of these problems is the culprit or if you fix them all and your system continues to struggle, it is time to call a Puyallup air conditioning professional like Sound Heating!

Continue Reading

Tags: , , , , , ,
Posted in Air Conditioning | Comments Off on Air Conditioning Guide: Things to Check on Your Broken AC Before Calling a Professional

How to Handle Furnaces That Turn Off and On Repeatedly in Puyallup

Tuesday, May 29th, 2012

York furnaces in Puyallup are designed to last decades without major problems so long as they receive regular heating system repairs.  They typically work so well, in fact, there is a danger of taking our comfort for granted and skipping the annual service for a year or two as time rushes by, waking up suddenly and brutally to a dark night and no heat.

In retrospect, a preliminary indication of trouble could have been the furnace continually turning off and on in short bursts, something that was tugging at your senses, but not strongly enough to really catch your attention.

Possible Problems

A furnace constantly turning on and off could often be a direct result of poor airflow through the system.  Heat builds up and the detectors sense the proper temperatures have been reached and automatically shut down.  In the room, the thermostat calls for more heat and starts the cycle over again.

A relay switch or control valve may also be worn and working improperly.  A crack in the heat exchanger might fuel the flame to burn too hotly and cause the sensor to misinterpret the information and shut down.

These problems not only impede the distribution of heat to the living spaces, decreasing comfort, but also create intense wear on the motor and controls, threatening the very life of the appliance.

Simple Solutions

Restricted airflow can be caused most often by a dirty or clogged filter.  At the furnace, there is usually a panel that can be removed to check, clean or replace the filter.  It is typically a single or series of cardboard and screen panels approximately 1′ by 2′, but varies by manufacturer and furnace output.

A vacuum to pull lint free or compressor to blow it clean are the recommended tools to use a few times each year.  It is a good idea to change the filters at the beginning of each heating season. The belts are also easily replaced.

The fan belts for the blower may also be worn loose and not pushing the air hard enough to get through the filters.  It is a good idea to check them regularly as well.

The Calvary Charge

When in doubt, call the experts out.  Scheduling an annual inspection and service by calling Sound Heating takes the worry out of living in a furnace heated home.  Besides the rite of safe passage for your peace of mind, trained mechanics can spot the defects and give you the best assurance of a long life of comfort and warmth.

When contracting with the same HVAC company over time, a relationship is built whereby they care nearly as much as you.

Continue Reading

Tags: , ,
Posted in Heating, Heating System Repairs, York Furnaces in Puyallup | Comments Off on How to Handle Furnaces That Turn Off and On Repeatedly in Puyallup

Different Types of Furnace Filters for Lacey Residents

Thursday, March 22nd, 2012

A good filter for your furnace is a must. Because that device heats and blows air throughout your home, you want to be sure that it doesn’t recycle contaminants and bacteria that could easily be captured at the air handler. By choosing the right filter you also contribute to your overall heating system maintenance over time.  That’s why it’s vital to choose the right furnace filter on the first try. Here are some furnace filters to consider and their various benefits to your home and family:

  • Electrostatic – Most electrostatic filters are permanent and must be washed on a regular basis. They are electronically charged to capture particles as they pass through, much like a magnet. These filters are effective because they are both physical and electronic. However, keep in mind that they are only as efficient as the cleaning they receive.
  • HEPA – HEPA is the highest rating available for a filtration system, removing up to 99.9% of all particles as small as 0.3 microns. However, they are also inefficient when used in furnaces as they severely reduce air flow. They are not often recommended for this reason.
  • Pleated – Pleated filters come in both reusable and permanent forms and can be either purely mechanical or electrostatic. There is a very wide range of efficiency ratings for pleated filters so make sure you analyze your home’s specific needs before selecting any one pleated filter.
  • Activated Carbon – Activated carbon is unique from the other three filter types because it effectively removes fumes, odors and chemicals from indoor air along with other larger particles. It is recommended that if you choose an activated carbon filter, you supplement it with a pleated or electrostatic filter (or choose a combination filter) to remove all unwanted components from your home.

There are a lot of options when it comes to furnace filters. To make sure you get only the best air quality, call Sound Heating and we can help you determine which pollutants are the biggest problem in your home.

Continue Reading

Tags: , ,
Posted in Heating, Heating System Maintenance, York Furnaces | Comments Off on Different Types of Furnace Filters for Lacey Residents

The Most Effective Environmentally Friendly Heating Methods

Monday, February 13th, 2012

Protecting the environment is a priority for many Puyallup homeowners these days. The problem is that it can’t be as a high a priority as heating your home. Sure, you want your home to be environmentally friendly, but you need it to be warm.

So, it seems you are forced to run your electric or fuel-powered furnace as much as is necessary and hope that it’s not too much for the environment — or your wallet — to take.

Beyond the traditional heating methods of electricity, gas, oil and what have you, there are some alternatives out on the market these days that can keep your home warm while also being green.

Geothermal

One solution is geothermal heat, which harnesses the natural heat of the Earth to warm your home. Pipes filled with coolant run through the ground outside your home, absorbing the warmth of the Earth. Then, the warm coolant is pumped into your home through a network of pipes that radiate heat.

This method is effective and requires no additional fuel or energy.

Micro Combined Heat and Power (MCHP) Systems

Relatively new to the game are so-called MCHP systems. These heating systems have on-board power generators with high-efficiency computer modules attached. The power module interfaces with the thermostat, calling for heat when necessary. That activates the generator system, which quietly and efficiently generates all the necessary power to run the heater.

These systems are incredibly efficient and can slash the cost of your heating bill. As an added benefit, they continue to work during power outages, which has obvious utility in areas that experience harsh winter storms.

Solar

Then, of course, there is the most obvious and readily available source of heat to the whole planet: the sun. Solar heating systems can be either active or passive, which essentially just depends on whether additional specialized equipment is to be installed.

Obviously, solar heating systems are a better choice for areas that get a lot of sunlight year round.

Whichever environmentally friendly heating solution you choose, they have the added benefit of lowering your heating bill, which is always welcome.  If you have any questions about these environmentally friendly heating methods please contact Sound Heat & AC

Continue Reading

Tags: , ,
Posted in Energy Savings, Fuel Powered Furnace, Solar | Comments Off on The Most Effective Environmentally Friendly Heating Methods

Heat Pump Tips: Common Questions

Monday, January 23rd, 2012

Even if you installed a heat pump in your Issaquah home years ago, you may still have questions about the normal operation of your indoor and outdoor units. Here are answers to a few of the more common questions about heat pumps.

Do I need to schedule a heat pump maintenance visit before each season, or just once a year?

Scheduling a yearly maintenance visit is necessary to the proper upkeep and safe operation of your heat pump. This also extends the life of the system and helps it run more efficiently. However, scheduling a visit before the heating and cooling seasons isn’t necessary, unless you’ve had any concerns or issues with your heat pump.

Should I be concerned about the steam coming from my outdoor unit?

All heat pumps have a defrost cycle that melts the frost off of the outdoor coils in the winter. The steam rising from the outdoor unit results from the defrost cycle. If you notice that the defrost cycle lasts longer than ten to fifteen minutes, or if it cycles on and off frequently, you should call a service technician to look at your heat pump. There could be an issue with airflow that is affecting the compressor.

I just installed a heat pump. Why is my furnace running?

Many heat pump systems use the furnace fan blower to help distribute the heat throughout the house. Unless you’ve installed a geothermal heat pump, your furnace is most likely your backup heater, so it will kick on when the outside temperature drops below 20° F.

Is it really that important to clean my outdoor unit? It’s impossible to keep it clean all the time.

Yes, cleaning the outdoor unit is an especially important maintenance task. Not only does a routine cleaning of all the outdoor components maintain your heat pump’s efficiency and performance levels, it also prevents safety hazards. When you schedule a yearly maintenance visit with one of our technicians, cleaning the coils and outdoor unit is part of the service; however, if you want to clean the coils yourself, have one of our technicians show you how to do this before you attempt it on your own. You could suffer from electric shock if you are not familiar with the proper cleaning procedure. You can also help by making sure that the debris is cleared from around the outdoor unit.

If you have any questions about the heat pump in your Issaquah home, or if you’d like to schedule a maintenance appointment, give us a call any time.

Continue Reading

Tags: , , , , ,
Posted in Heat Pumps | Comments Off on Heat Pump Tips: Common Questions